Specifications

International Radio and Electronics Corporation

25166 Leer Drive Elkhart, Indiana 46514 • 574–262–8900 • www.irec1.com

SECTION 2: DP-3 OPERATION-STANDARD CROWN

FM FRONT PANEL

2.1 USER CONTROLS AND ADJUSTMENTS

If you are using the Crown/Omnia DP3 with a standard Crown FM 30, 100, 250, 500,

1000, or 2000, three control options are open to you. The first is the front panel

‘processing pot’ that increases or decreases the setting of the ‘Wide Band AGC Level’.

The second is the gain control switches located next to the processing pot. The last is the

ETHERNET port which will allow for adjustment to the processing variables, such as

gain within each band, attack time, and so forth, done through a software instruction that

changes these settings ‘on-the-fly’ each time it is selected.

2.2 USING REMOTE CONTROL INTERFACE VIA COMPUTER

ETHERNET PORT

See Section 4 for instructions on the use of the remote control interface for the

DP-3 through a computer ETHERNET port. The ETHERNET source allows for

modification of processing parameters, and the storing of as many as five user-

customized processing presets for the DP-3.

PROCESSING POT

GAIN CONTROL SWITCHES

SWITCHESSWITCH