Specifications

International Radio and Electronics Corporation

25166 Leer Drive Elkhart, Indiana 46514 • 574–262–8900 • www.irec1.com

1.3 CROWN-OMNIA DP3 INSTALLATION INSTRUCTIONS – FMX

TRANSMITTER

FIG 1

• Remove the hardware fastening the Top Cover to the Unit chassis as shown in FIG 1

and remove the cover.

NOTE: The hardware set consists of a # 6 lock-washer, a #6 flat washer, and a 6-32

screw or a 6-32 SEMS internal tooth lock-washer and #6 Flat washer.

• Save this hardware. It will be reused after PWA installation is completed.

FIG 2