Specifications

PC 4500 Series
Specifications
PC 4500 Series Standard-Tip Forks
Nominal Fork Length in 36 42 48 54 60 96
11 Actual Fork Length in 35.75 41.75 47.75 53.75 59.75 95.75
12 Overall Length in 93.06 99.06 105.06 111.06 117.06 153.06
13 Wheelbase Forks Raised in 71.25 77.25 83.25 89.25 95.25 133.25
14 Grade Clearance % 25 23 21 20 19 13
15 Turning Radius Forks Raised in 81.4 87.4 93.4 99.4 105.4 143.3
7 Truck Weight** 6000 lb lb 1975 1991 2007 2023 2039 2189
8000 lb lb 1994 2018 2042 2066 2090 2254
1 Manufacturer Crown Equipment Corporation
2 Model PC 4500
3 Load Capacity lb 6000/8000
4 Power Electric 24 Volts
5 Operator Type Stand-up Ride
8 Lift Height in 9.25
9 Lift in 6
10 Head Length in 57.31
16 Outside Fork Spread Standard Tip in 22/27
Extended Tip* in 23/28
17 Speed Travel Power Unit First Forks First
Empty mph 9.0 6.0
4000 lb mph 7.0 5.7
6000 lb mph 6.3 5.1
8000 lb mph 6.0 5.0
General Info
Dimensions
Performance
Forks
 Model  PC 4500-60 and PC 4500-80
Drive Tire in 13 x 4.5 x 8 Poly
Casters in 2 - 4 x 2.5 Poly
Load Wheels in 2 - 3.25 x 6.5 (-302)
 -301 Moderatecut/tearresistance,highcapacity.Highcapacitytransport.Notfordockuse.
-302 Highest cut/tear resistance offered. Extremely high capacity, low rolling resistance. Docks, rough floors and floor debris.
-401 Combines good cut/tear resistance and very high capacity. Use where nothing else works.
Wheels and Tires
w/o battery
PC 4500 Series Extended-Tip Forks
Nominal Fork Length in 84 93 96 132*** 141*** 144***
11 Actual Fork Length in 83.75 93 95.75 131.75 141.00 143.75
12 Overall Length in 141.06 150.31 153.06 189.06 198.31 201.06
13 Wheelbase Forks Raised in 103.25 103.25 103.25 151.25 151.25 151.25
14 Grade Clearance % 17 17 17 12 12 12
15 Turning Radius Forks Raised in 113.4 113.4 113.4 161.4 161.4 161.4
7 Truck Weight** 6000 lb lb 2172 2253 2268
8000 lb lb 2232 2313 2328
2659 2740 2755
Forks
w/o battery
** Subtract 80 lb from trucks weights above when ordering manual steering option
*** Triple length forks (132", 141" and 144") are a custom option
* Add .5" for triple length forks