Specifications Sheet

QUALITY. RELIABILITY. LONGEVITY. LOW-MAINTENANCE. CROWN .
• Rugged Cell Construction
Signature heavy-duty cast-on
strap and terminal post structures
manufactured in a highly automated
production process deliver unmatched
electrical efficiency and durability.
• Low Maintenance Reliability
Crown Renewable Products’ low
maintenance design ensures reduced
Preventative Maintenance frequency,
lower PM service costs, and
best-available user ROI:
– Proprietary cell construction
that reduces water loss during
the charge cycle.
– Additional fluid headspace above
the battery plates so batteries
can perform longer between
watering intervals.
– Water-Saver
™
battery cover and
vent components capture gasses
emitted during the charge cycle –
and return restored fluid restored
to the battery.
• Safe & Easy Handling
CRP Power Module and Monobloc
batteries include fixed handles or
lifting lugs to enable safe and easy
handling as well as the flexibility
to be installed with – or without –
battery racks.
2CRP3690 2CRP2030 2CRP710 6CRP525 6CRP295 6CRP400
• Posi-Wrap
™
Plate Protection
A Vertical Double Mat Slyver Wrap
becomes embedded into the plate
surface to ensure complete active
material retention for longevity.
B Horizontal Glass Mat Wrap provides
a secondary layer of active
material retention.
C The Koroseal Retainer Wrap is a
perforated envelope tightly binds the
two glass mat wraps to the plate while
providing a third layer of insulation
against mossing and short-circuits.
D The Sleeve Separator is a high-porosity
sleeved separator that delivers a final
layer of insulation from direct
plate-to-plate contact and mossing.
• Individual 2-Volt Steel Tray Design
Couples a powerful range of ampere-hour
capacities that afford RE system users with
unmatched application flexibility while
providing a better solution for temperature
management and electrical isolation.
• Z3 Plate Construction
Power Module batteries Z3 plate
design combines three integrated
features for superior electrical
performance and longevity.
– 13 vertical plate wires that withstand
the rigors of deep cycling service and
high-rate discharge.
– Offset internal wires are designed for
less internal resistance and maximum
active material retention to deliver
premium battery life.
– LifePlus
™
Active Material, manu-
factured with premium lead oxide
from our own oxide mill to exact
specifications, applied uniformly and
temperature cured in computer-
controlled Curing Ovens that assure
optimum product performance and life.
• Cell Cover
– Heat-sealed to ensure a permanent, leak-free
seal between the cell container and cover.
– The cover’s double O-ring bushing design
allows for positive plate growth without
cover leakage and eliminates cell
cover distortion.
• Element Protector
Full width element protector with
individual fingers between each plate lug
prevents premature failure from mossing
short-circuit and prevents separator
damage during cell inspection.
A
B
C
D
Common
Design Features