MSDS

DR
Page 5
Safety Data Sheet (SDS)
According to Commission Regulation (EU) No 453/2010
Version number 1
Printing date 26.03.2012
Revision date 26.03.2012
Product name: Ballpen inks Red
The product is not explosive.
· 7.2 Conditions for safe storage, including any incompatibilities
Store in cool, dry and well-ventilated place. Store away from incompatible materials.
(Contd. of page 4)
· 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated.
8 SECTION 8: Exposure controls/personal protection
· Information about design of technical facilities:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure
limits.
· 8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace:
100-51-6 Benzyl alcohol (25%)
WEEL (USA)
44 mg/m³, 10 ppm
102-71-6 2,2',2''-nitrilotriethanol (4%)
TLV (USA)
5 mg/m³
· Additional information: The lists valid during the making were used as basis.
· 8.2 Exposure controls
· Appropriate engineering controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure
limits. Ensure adequate ventilation.
· Respiratory protection: Suitable respiratory protective device recommended.
· Skin protection:
Protective gloves
· Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the
glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
(Contd. on page 6)