MSDS

DR
Page 4
Safety Data Sheet (SDS)
According to Commission Regulation (EU) No 453/2010
Version number 1
Printing date 26.03.2012
Revision date 26.03.2012
Product name: Ballpen inks Red
(Contd. of page 3)
· 5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide (CO)
Carbon dioxide
Other irritating and toxic gases.
· 5.3 Advice for firefighters
· Protective equipment:
Wear self-contained respiratory protective device.
Wear suitable protective clothing and eye/face protection.
6 SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures
Refer to Section 8 for personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.
Evacuate personnel to safe areas.
· 6.2 Environmental precautions
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
· 6.3 Methods and material for containment and cleaning up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
· 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 SECTION 7: Handling and storage
· 7.1 Handling
· Precautions for safe handling:
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.
Do not get in eyes, on skin, or on clothing. Wash thoroughly after handling. Use this material with adequate
ventilation.
· Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
(Contd. on page 5)