Specifications

7
 System status: System O.K. or System Pressurizing
 Seven, (7) different pressure regulation points based on seven different user definable GPM flow brackets
Set single pressure set point value. (Desired system pressure set point regardless of flow)
 Toggle between either Single Set Point or Flow Based Pressure Set Points
 Pump station’s historic total gallons pumped. Not user re-settable.
 Pump station’s total gallons pumped since last time user pushed reset button on either the Touchscreen
operator interface or the monitoring software’s on screen mouse click button
View and make individual adjustments for wet well inlet self-flushing filter, or discharge filter: 1. Duration of
flush. 2. Frequency of flush. 3. Flush enabled or disabled. 4. Differential PSI. 5. Manual Flush 6.
Flushing On/Off indicator
 Pressure set point for flush activation, (if so equipped).
 View and adjust the activation level in inches for the remote fill pump or valve. Value is based on input
from a submerged, stainless steel 4-20ma pressure transducer
 Password protected entry window to alter PLC registers for Watertronics personnel or advanced users
 Window to log the pump stations Highest Pressure, Lowest Pressure, Highest Flow, Lowest Flow, with
Month, Day, Year, Time of event since last reset of Running Log.
 Total number of starts for each pump
Time and Date log for last station or individual motor alarm
 Pump station’s lifetime historic event log tagged for date and exact time for Pressure Changes, Flow
Changes, Pumps On/Off, Alarms, and Customizable events like inlet and discharge filter flush count.
Logs 300,000 events or approximately one season’s data
Data can be searched for by date. Data can be downloaded to a disc.
 A data chart in spread sheet form showing all collected data with controls for the user to navigate to data
by date
 A full graphical trending chart scalable for any time span from minutes to years to view pressure, flow, and
pumps running as standard. The graph is customizable by the user to graph and record any of the 3755
PLC data registers
 Full print abilities for all charts
 All data will by collected by event to capture critical data point without filling memory limitations
 An Alarm Paging window to configure up to three, (3), different pagers to be called for sending of a digital,
coded alarm message
Input window for initialization string to configure the phone modem and computer before connection to
pager. Includes serial port identifier locator
 Each pager phone number has a window for entering pager commands. Test button to test set up and
send a test call to the pager selected
Modes of communication for connecting to the pump system include: Direct Wire, Short Haul Modem,
Radio Modem- Spread Spectrum, UHF, and VHF, Fiber Optic Cable, Dial-up Phone Modem, and Cell
Phone Modem.
 Each installed software package can be setup to be a network server or client. The package
connected to the pump system will be a sever allowing up to 5 remote clients to attach to it. Thus
allowing any form of PC running Watervision to connect to the server using TCP/IP via an Intranet or
over the Internet. Because the same software is loaded, the user interface will be identical at home
as in the office, only the means of connection will vary.
 When using a dial-up type connection an Auto Dial feature is available. User configured, allowing the user
to be connected on particular days and times
 Area to set the initialization string guaranteeing compatibility with nearly every modem
 Area to set the phone number of the remote site
 Settable node address allowing connections to 245 different pump sites
 Settable serial port connection
Settable data rate up to 19200 baud
 Settable connection setting including: Data Bits, Parity, and Stop Bits
 Performance setting allowing adjustments if necessary for different computer speeds and connection
types
 Connection diagnostics for troubleshooting any communications problems
PumpLink Sharing allowing the user to setup up to 16 different data viewers out of all 2056 pump station
analog and 1699 digital data points.