CT Boiler Mounting Instructions A B * Front Of Tank & Boiler This Side Fasten Both Long Struts To The Tank Top. Set The Appropriate 'A' And 'B' Dimensions For The ° ° The Boiler Mounting Plates And Fasten Them To The Long Struts. 7 (3) Partially Insert The Boiler Leg Mounting Screws 1/4" Hex Nuts — (5) Tighten The Set Screws Before Anchoring Leaving Approximately 1/2" Under The Screw Head SN The Boiler With The Leg Mounting Screws. Before Setting The Boiler On The Mounting Plates.
CT Mounting Hardware Configuration (2) Boiler (2) Mounting Plate (2) (4) x 3/4" Slotted (4) Hex Washer Head Screw \ ! Phillips Head Screw Flat Washer ; | x 3/4* Hex Nut x 2-172" Hex Head Cop Screw (4) Clomping Nut M10 x 20 Metric * Button Head Screws (2) 34-172" Strut (6) MID Flat Washer
CSC Boiler Mounting Instructions Partial Boiler Base Legs Shown For Boiler Mounting Plates IN Short Strut 1 wo NL Front OF Boiler This Side (See Note) Figure 1 (1) Fasten Both Long Struts To The Tank Top. . Figure 2 Model ‘A (2) Loosely Attach The 18" Short Struts To The Long Struts CSC50 5-716 With 5/1 6-18 x 3/4" Phillips Screws And Clamping Nuts.
(SC Mounting Hardware Configuration (4) x 1/2" Hex Head Bolt (4) MID Flat Washer (4) 3/8" Hex Jom Nut (2) 18" Strut (8) Clamping Nut Ne (2) 34-172" Strut (2) Boiler Mounting Plate (8) x 3/4" Phillips Head Screw J (6) MIO x 20 Metric Button Head Screws (8) 5/16" Flat Washer (6) MIO Flat Washer
ig wow wow wow wow wow wow wow Short Strut A Ww Figure | Model ‘A AW1037 6 AWI/BWEF 061 7-1/4 ZIMBABWE (95 10-172 AWI/BWF128 13-34 AWI/BWF 162 17 AWI/BWF195 20-1/4 AWI/BWF229| 23-12 AW1 262 26-3/4 AWI 295 30 (1) Fasten Both Long Struts To The Tank Top. Figure 2 (2) Loosely Attach The 18" Short Struts To The Long Struts With x 3/4" Phillips Screws And Clamping Nuts.
AWI Mounting Hardware Configuration (4) x 3/4" Slotted ' Hex Washer Head Screw 1 (4) Base Hold Down Clip Boiler Mounting Plate (8) x 3/4" Phillips Head Screw l > (8) 5/16" , Flo Washer (6) MIO x 20 Metric Button Herod Screws (2) 18" Strut (6) MIO Flat Washer
