-RPT STATUS INPUT POWER OUTPUT Crown Bus Signal Repeater E106377 ® Applies only to 120 VAC, North American units. Copyright ©1997 by Crown International, Inc., P.O. Box 1000, Elkhart, Indiana 46515-1000 U.S.A. Telephone: 219-294-8000. The IQ-RPT is produced by the Professional Audio Division of Crown International, Inc. Trademark Notice: MPX6,™ and SMX-6 ™ are trademarks and Crown,® Amcron,® IQ System ® and P.I.P.® are registered trademarks of Crown International, Inc.
THREE YEAR FULL WARRANTY WORLDWIDE NORTH AMERICA SUMMARY OF WARRANTY The Crown Audio Division of Crown International, Inc., 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A.
The information furnished in this manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during installation, operation or maintenance. If you need special assistance beyond the scope of this manual, please contact our Technical Support Group. Crown Audio Division Technical Support Group Plant 2 SW, 1718 W. Mishawaka Rd., Elkhart, Indiana 46517 U.S.A.
IQ-RPT Crown Bus Signal Repeater ® CONTENTS 1 Welcome ____________________________________________ 5 2 Installation ____________________________________________ 6 2.1 Power Connection ___________________________________ 6 2.2 Connecting the Crown Bus ___________________________ 6 3 Operation ____________________________________________ 7 4 Specifications _________________________________________ 7 5 Service ____________________________________________ 8 5.
IQ-RPT Crown Bus Signal Repeater ® STATUS INPUT POWER OUTPUT Fig. 1.1 IQ Repeater 1 Welcome The IQ-RPT will typically extend a Crown Bus current loop by 1,000 feet (305 meters) or more. Up to 57 repeaters can be added to a single loop, so total loop distance my reach 58,000 feet (17.7 kilometers). That’s almost 11 miles! Figure 1.3 shows a system with an IQINT II and repeater on its first Crown Bus loop. The Crown Bus is a serial communication loop designed to transmit IQ commands and data.
IQ-RPT Crown Bus Signal Repeater ® 2 Installation The installation of an IQ Repeater can be divided into two parts: power connection and Crown Bus connection. 2.1 Power Connection The IQ Repeater operates in one of two power settings. The 115 VAC setting is for operation from 100 to 120 VAC. Operation from 220 to 240 VAC uses the 230 VAC setting. The Repeater is factory set to the correct setting for the country to which it is shipped.
IQ-RPT Crown Bus Signal Repeater ® 3 Operation There isn’t much to operating an IQ-RPT. Just plug it in and it works. The operating environment should be free of salt and moisture with temperatures between 32° and 158° farenheit (0° to 70° celsius). STATUS INPUT CROWN BUS IN AC VOLTS: 100-120 AMPS: .25 50-60 Hz OUTPUT CONTINUITY AC VOLTS: 220-240 AMPS: .25 50-60 Hz 0.
IQ-RPT Crown Bus Signal Repeater ® 5 Service This unit has very sophisticated circuitry which should only be serviced by a fully trained technician. This is one reason why each unit bears the following label: CAUTION: To prevent electric shock, do not remove covers. No user serviceable parts inside. Refer servicing to a qualified technician. Factory Service Shipping Instructions: 1.
Crown Factory Service Information Shipping Address: Crown International, Inc., Factory Service, Plant 2 SW, 1718 W. Mishawaka Rd.
