Specifications

CS-47 GSM Link - Configuration Guide Chapter 6 - Remote Access Configuration
22
Table 6: SMS Commands used for Remote Control

# Command SMStexttobesendvia
Mobile
Exampleoftexttobe
send
ThereturnedSMS
messagefromunit
1 ARM ARMareauserpassword ARMA1234
ARM Command error:
Area A already armed
ARM Command
Area 1 Arm
2 DISARM
DISARMareapassword
DISARMA1234
1.DISARM Command error:
Area A already Disarmed
2.DISARM Command:
Area 1 Disa
rmed
3 OUTPUTON
control
OUTONnumber OUTON4
1.OUTPUT ON Command Error:
ARMED mode
2.OUTPUT ON Command:
Output 4 is ON
3.OUTPUT ON Command Error:
Output 4 already is ON

4 OUTPUTOFF
control
OUTOFFnumber OUTOFF4
1.OUTPUT OFF Command Error:
ARMED mode
2.OUTPUT OFF Command:
Output 4 is OFF
3.OUTPUT ON Command Error:
Output 4 already is ON

5 ControlPanel
status
STATUS STATUS
ARMED STAY: A, B
ARMED: A, B
ARMING STAY: A, B
ARMING : A, B
OUTPUT ON: 1, 3, 7
6 GSM/GPRS
RSSIstatus
STATUSGSM STATUSGSM
Returned SMS with
the provider name
RSSI (signal
measurement) and
GPRS status

7 BALNACE BALANCE BALANCE
8 COMMAN D 
COMMANDuserpassword COMMAND1234
User Command is OK

NOTE:whenusingremotecontrolfeaturethenumberofCS47linkunderremote 
numbershouldbeinsertwiththecountrycode(Note:checkwithyour
cellularprovider)