Specifications

CS-47 GSM Link - Configuration Guide Chapter 5 - Configuring the CS-47 Link Unit
10
2. Selectalanguage.
3. Clickthe
button.
4. IfyourSIMcarddoesNOTrequireaPINnumberignorethenextstep.
IfyoudohoweverrequireaPINnumbercontinuebelow.


5. EnteraPINnumberandclicktheOKbutton.
Configuring the Unit Locally
ThissectiondescribeshowtoconfiguretheunitusingalocalCOMport.
ToconfiguretheunitremotelyseeConfiguringtheUnitRemotelyonpage11.
ConnectyourPCorlaptoptotheunitusingaserialcableconnectedviaCOMport
ConnectremotelyviaanotherCS‐47linkmodemtotheoneyouwanttoconfigure

IMPORTANT NOTE
Before you are able to configure the system unit remotely it must be first
configured locally.
 To connect locally using serial cable:
1. ConnecttheserialcablebetweenyourPCandtheCS‐47linkmodem
configurationport.SeePage6forthelocationoftheconnector.
2. LoadtheCS‐47configurationprogram.


3. ClicktheLocalcontrolviaCOMbutton.
4. Clickthe
button.