Specifications

9
CHAPTER 5.
Configuring the CS-47 Link Unit
TheCS‐47unitcanbeconfiguredineitherBackuporIndependent(standalone)
modes.TheBackupmodeusestheGSMlinkifthePSTNfailorreportviaPSTN
failed.
Pre-requisites
BeforeconfiguringtheCS‐47dothefollowing:
Toensureproperreporting,disabletheNoKeypadIndicationifArmedsetting

RunnerprogrammingAddress:P25E13E5E
Disablethefollowingsetting:

RunnerprogrammingAddress:P168E1‐16E4E
ConnecttheCS‐47LinkmodemtothePC

PowerOFFtheRunneranddisconnectthebatterybeforeconnectingtheserialcable
Loading the Software Configuration Program
IMPORTANT NOTE
The CS-47 Link modem must be connected to the PC using a serial cable
before you can run the configuration software.
 To load the configuration software:
1. Onthedesktop,double‐clickthe
icon.

