Specifications

CS-47 GSM Link - Configuration Guide Chapter 3 - Physical Layout

Table 1: Component Description

Component Description

Status LEDs

NET: Turns green when there is communication with the

TCP/IP server.

BUS: Blinks yellow when the bus is communicationg with

the control panel.

FAIL: Blinks or solid red on network error. For example, a

problem with the SIM card or GSM network , open tamper

Power LED Turns red when power is applied to the unit.

Modem LED Blinks yellow when the GSM service is connected.

SIM Card Holder SIM card used for the GSM modem.

Antenna Cellular phone antenna connector.

Tamper Switch Activates alarm if cover is removed.

Program

Connector

Connector for connecting the inputs and outputs.

CONFIG PORT Serial port that connects to a PC or laptop.

Battery

Connector

Backup rechargeable battery 12 V/1.3 Ah lead acid.

Bus Connector For communication with the control panel.

Power LED Red when power good.

GSM Modem Siemens TC63 based GSM modem

GSM Service LED Blinks yellow when GSM service is connected.

Output 1&2

Gnd

Terminal Block

Input 1&2

