Datasheet

Max. absorbed power
CB12 with solid state outputs: 1.5 W
CD12: 1.5 W
CD20: 2.5 W
XD26 - XB26: 3 W
XD26 -XB26 with extension: 5 W
XD26 with solid state outputs: 2.5 W
CB12 - CD12 -CD20 with solid state outputs - XD10 -XB10 with solid state outputs: 3 W
XD10 -XB10 with relay outputs: 4 W
XD26 -XB26 with solid state outputs: 5 W
CB20 -CD20 with relay outputs - XD26 with relay outputs: 6 W
XD10 -XB10 with extension: 8 W
XD26 -XB26 with extension: 10 W
Protection against polarity inversions
Yes
Yes
Digital inputs (I1 to IA and IH to IY)
Input voltage
12 V DC ( -13% / +20%)
24 V DC ( -20% / +25%)
Input current
3.9 mA @ 10.44 V DC
4.4 mA @ 12.0 V DC
5.3 mA @ 14.4 VDC
2.6 mA @ 19.2 V DC
3.2 mA @ 24 V DC
4.0 mA @ 30.0 VDC
Input impedance
2.7 k Ω
7.4 k Ω
Logic 1 voltage threshold
≥7VDC
≥15VDC
Making current at logic state 1
≥2mA
≥2.2mA
Logic 0 voltage threshold
≤3VDC
≤5VDC
Release current at logic state 0
< 0.9 mA
< 0.75 mA
Response time
1→2cycletimes
1→2cycletimes
Maximum counting frequency
Inputs I1 & I2: Ladder (1 kHz) & FBD (up to 6 kHz)
Inputs I3 to IA & IH to IY: In accordance with cycle time (Tc) and
input response time (Tr) : 1/ ( (2 x Tc) + Tr)
Inputs I1 & I2: Ladder (1 kHz) & FBD (up to 6 kHz)
Inputs I3 to IA & IH to IY: In accordance with cycle time (Tc) and
input response time (Tr) : 1/ ( (2 x Tc) + Tr)
Sensor type
Contact or 3- wire PNP
Contact or 3- wire PNP
Conforming to IEC/EN 61131 -2
Type 1
Type 1
Input type
Resistive
Resistive
Isolation between power supply and inputs
None
None
Isolation between inputs
None
None
Protection against polarity inversions
Yes
Yes
Status indicator
On LCD screen for CD and XD
On LCD screen for CD and XD
Analogue or digital inputs (IB to IG)
CB12 - CD12 - XD10 - XB10
4inputsIB→IE
4inputsIB→IE
CB20 - CD20 - XB26 - XD26
6inputsIB→IG
6inputsIB→IG
Inputs used as analogue inputs
Measurement range
(0→10V)or(0→Vpowersupply)
(0→10V)or(0→Vpowersupply)
Input impedance
14 k Ω
12 k Ω
Input voltage
14.4 V DC max.
30 V DC max.
Value of LSB
14 mV, 4 mA
29 mV, 4 mA
Input type
Common mode
Common mode
Resolution
10 bits at max. input voltage
10 bits at max. input voltage
Conversion time
Controller cycle time
Controller cycle time
Accuracy at 25°C
± 5%
± 5%
Accuracy at 55°C
± 6.2%
± 6.2%
Repeat accuracy at 55 °C
± 2%
± 2%
Isolation between analogue channel and power supply
None
None
Cable length
10 m maximum, with shielded cable (sensor not isolated)
10 m maximum, with shielded cable (sensor not isolated)
Protection against polarity inversions
Yes
Yes
Potentiometer control
2.2 k Ω / 0.5 W (recommended)
10 k Ω max.
2.2 k Ω / 0.5 W (recommended)
10 k Ω max.
Inputs used as digital inputs
Input voltage
12 V DC ( -13% / +20%)
24 V DC ( -20% / +25%)
Input current
0.7 mA @ 10.44 VDC
0.9 mA @ 12.0 VDC
1.0 mA @ 14.4VDC
1.6 mA @ 19.2 VDC
2.0 mA @ 24.0 V DC
2.5 mA @ 30.0 VDC
Input impedance
14 k Ω
12 k Ω
Logic 1 voltage threshold
≥7VDC
≥15VDC
Making current at logic state 1
≥0.5mA
≥1.2mA
Logic 0 voltage threshold
≤3VDC
≤5VDC
Release current at logic state 0
≤0.2mA
≤0.5mA
Response time
1→2cycletimes
1→2cycletimes
Maximum counting frequency
In accordance with cycle time (Tc) and input response time (Tr) :
1/ ( (2 x Tc) + Tr)
In accordance with cycle time (Tc) and input response time (Tr) :
1/ ( (2 x Tc) + Tr)
Sensor type
Contact or 3- wire PNP
Contact or 3- wire PNP
Conforming to IEC/EN 61131 -2
Type 1
Type 1
Input type
Resistive
Resistive
Isolation between power supply and inputs
None
None
Isolation between inputs
None
None
Protection against polarity inversions
Yes
Yes
Status indicator
On LCD screen for CD and XD
On LCD screen for CD and XD
Characteristics of relay outputs common to the entire range
Max. breaking voltage
5→30VDC
24→250VAC
Max. Output Common Current
12A for O8, O9, OA
Breaking current
CB - CD - XD10 - XB10 - XR06 - XR10: 8 A
XD26 -XB26: 8 x 8 A relays, 2 x 5 A relays
XE10: 4 x 5 A relays
XR14: 4 x 8 A relays, 2 x 5 A relays
Electrical durability for 500 000 operating cycles
Utilization category DC -12: 24 V, 1.5 A
Utilization category DC -13: 24 V (L/R = 10 ms), 0.6 A
Utilization category AC -12: 230 V, 1.5 A
Utilization category AC -15: 230 V, 0.9 A
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
05/09/2011 www.crouzet.com