Datasheet

I WWW.CROUZET-AUTOMATION.COM I 02 I em4
Maximum utilization altitude Operation: 2000 m
Transport: 3000 m
Mechanical resistance Immunity to vibrations IEC/EN 60068-2-6, Fc test
Immunity to shock IEC/EN 60068-2-27, Ea test
Resistance to electrostatic discharge Immunity to ESD IEC/EN 61000-4-2, level 3
Resistance to HF interference
(Immunity)
Immunity to radiated electrostatic elds IEC/EN 61000-4-3, level 3
Immunity to fast transients (burst immunity) IEC/EN 61000-4-4, level 3
Immunity to shock waves IEC/EN 61000-4-5
Radio frequency in common mode IEC/EN 61000-4-6, level 3
Conducted and radiated emissions
(in accordance with EN 55022/11 group 1)
Class B
Operation temperature
- 20 °C (-4°F)  +60°C (140°F) (+40°C (104°F) in a non-ventilated enclosure)
Storage temperature
- 40 °C (-40°F)  +80°C (176°F)
Relative humidity 95% max. (no condensation or dripping water)
Screw terminals connection capacity Flexible wire with ferrule: 1 conductor: 0.2 to 2.5 mm2 (AWG 24...AWG 14)
Flexible wire with ferrule: 2 conductors: 0.2 to 0.75 mm2 (AWG 24...AWG 18)
Rigid wire: 1 conductor: 0.2 to 2.5 mm2 (AWG 24...AWG 14)
Rigid wire: 2 conductors: 0.2 to 0.75 mm2 (AWG 24...AWG 18)
Tightening torque: 0.5 N.m (4.5 lb-in) (tighten using screwdriver diam. 3.5 mm)
Stripping length: 6 mm
Supply
Nominal voltage Powered by the controller
Max. absorbed power 2.5 W
Inputs
Digital24VDCandanaloginputs12bit/28.8V-6inputsfromI1toI6
Inputusedasdigitalinput(poweroffstate)
Input voltage 24 VDC (-15% / +20%)
Input current 1.8 mA @ 20.4 V
2.1 mA @ 24 V
2.5 mA @ 28.8 V
Input impedance 11.6 kΩ
Logic 1 voltage threshold u 11 VDC
Making current at logic state 1 u 1 mA
Logic 0 voltage threshold y 9 VDC
Release current at logic state 1 y 0.7 mA
Response time 1 to 2 cycle times
Sensor type Contact or 3-wire PNP
Conforming to IEC/EN 61131-2 Type 1
Input type Resistive
Isolation between power supply and inputs None
Isolation between inputs None
Protection against polarity inversions Yes
Status indicator On LCD screen
Cable length y 100 m
Input used as analog input
Measuring range
0  10 V or V power supply
Input impedance 11.6 kΩ
Maximum value without destruction 28.8 VDC max
Input type Common mode
Resolution 12 bit at maximum input voltage (10.5 bit at 10V)
Value of LSB 7.03 mV
Conversion time Controller cycle time
Maximum error in 0-10V mode +/- 1.1 % of full scale at 25°C (77°F)
+/- 1.6 % of full scale at 55°C (131°F)
Maximum error in 0-V power supply mode +/- 3.5 % of full scale at 25°C (77°F)
+/- 4.4 % of full scale at 55°C (131°F)
Repeat accuracy at 55°C (131°F) +/- 0.5 %
Isolation between analog channel and power supply None
Protection against polarity inversions Yes
Potentiometer control 2.2 kΩ / 0.5 W (recommended), 10 KΩ max.
Cable length y 10 m with shielded twisted cable (sensor not isolated)