Instructions / Assembly

Installation
Wiring Connections / Hookup
Gas Heated Model
All gas model dryers are 120 volts and come with an integrated 3-prong NEMA plug
intended for connection to a dedicated branch receptacle.
Gas Information
Gas installation and adjustment must be done by qualied, licensed personnel. It is your
responsibility to have all plumbing connections, materials, and workmanship comply with
national and local codes in the country of installation. In the absence of such codes, all
plumbing connections, materials, and workmanship must comply with the National Fuel Gas
Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/
CGA-B149.1-M91 (Natural Gas) or CAN/CGAB149.2-M91 (L.P. Gas) or LATEST EDITION.
It is important that any gas pressure regulators meet the requirements of all installed
appliances.
IMPORTANT
• Failure to comply with applicable codes, and the requirements stipulated in this manual,
can result in personal injury and improper operation of the dryer.
• For ease of service, the individual gas supply line of each dryer must have its own
manual shutoff valve.
• The dryer must be disconnected from the gas supply piping system during pressure
testing.
• Failure to isolate or disconnect the dryer from the gas supply as noted can cause
irreparable damage to the gas valve, voiding the warranty.
• Undersized gas piping will result in ignition problems, slow drying, increased use of
energy, and can create a safety hazard.
• The manufacturer of this appliance does not recommend the use of exible gas supply
line/hose. If permitted by applicable codes, the exible line must be suitable for the
appliance category.
Grounding Information
This appliance must be grounded. In the event of malfunction or breakdown, grounding
will reduce the risk of electric shock by providing a path of least resistance for electric
current. This appliance is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
WARNING
• Improper connection of the equipment grounding conductor can result in a risk of
electric shock. Check with a qualied electrician or service representative or personnel
if you are in doubt as to whether the appliance is properly grounded. Do not modify the
plug provided with your dryer- if it will not t the outlet, have a proper outlet installed by
a qualied electrician.
2:8