Owners Manual

112146-61 www.amdry.com 21
Program Location 02 (PL02)
Percent dry from 90 to 100%
Dryness Level IncreaseDryness Level Decrease
Summary: The percentage of dryness is programmable from a minimum of 90% to a maximum of 100%.
or
PL02
PdrY
PL03
Perm Press
100 HI Temp
Perm Press
To exit
program
mode open
program
switch
LO Temp
Refer to Programming
Instructions for instructions on
entering program locations.
Proceed
to next
location to
be changed
(Wait 3-Seconds)
("Hold In" to Accelerate) ("Hold In" to Accelerate)
Location to be viewed/changed.
Display reads “PdrY” percent of dryness
and the actual numeric value programmed
(90-100%). If no change, press “Perm
Press” key, otherwise press the “HI” or
“LO” key and then “Perm Press” key.