CROSSOVER 2.0 SERIES In a class by itself MODEL NO. WHLFP817M WHLFP817MI WA S H E R O P E R AT I N G M A N UA L DOC. NO. 098030 EDITION 21.
Intentionally blank
Operating Manual WHLFP817M WHLFP817MI WARNING: ALL OPERATING AND MAINTENANCE PROCEDURES SHOWN IN THIS MANUAL MUST BE FOLLOWED DAILY FOR PROPER OPERATION OF YOUR MACHINE. PLEASE ENTER THE FOLLOWING INFORMATION AS IT APPEARS ON THE MACHINE(S) DATA PLATE(S). MACHINE MODEL MACHINE SERIAL NUMBER(S) ELECTRICAL CHARACTERISTICS: VOLTS, PHASE, HZ. KEEP THIS MANUAL IN A SECURE PLACE FOR FUTURE REFERENCE.
Intentionally blank
SAFETY AND WARNINGS SIGNS Replace If Missing Or Illegible One or more of these signs must be affixed on each machine as indicated, when not included as part of the front instruction panel.
SAFETY AND WARNINGS SIGNS WARNING LABEL FOR POWER CABLE: FIRE HAZARD LABEL ADJACENT TO DOOR:
SAFETY AND WARNINGS SIGNS ELECTRICAL HAZARD LABEL ADJACENT TO DOOR: LOCATED ON THE REAR SHIPPING SECURITY BRACE: If you need to order more safety or warning signs, call the Laundrylux Parts Department at (516) 371-2000, or call your local dealer.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANTES MESURES DE SECURITE WARNING - To reduce the risk of fire, electric chock, or injury to persons when using your appliance: AVERTISSEMENT - Pour réduire les risques d´incendie, de choc électrique ou de blessure quand, I´appareil est utilisé: 1. Read all instructions before using the appliance. Lire toutes les instructions avant d’utiliser l’appareil. 2. This machine must be installed according to the installation instructions.
NOTICE TO: OWNERS, OPERATORS AND DEALERS IMPROPER INSTALLATION AND INADEQUATE MAINTENANCE, POOR HOUSEKEEPING AND WILLFUL NEGLECT OR BYPASSING OF SAFETY DEVICES MAY RESULT IN SERIOUS ACCIDENTS OR INJURY. TO ASSURE THE SAFETY OF CUSTOMERS AND/OR OPERATORS OF YOUR MACHINE, THE FOLLOWING MAINTENANCE CHECKS MUST BE PERFORMED ON A DAILY BASIS.
Intentionally blank
Contents Control Panel + Instructions For Use.................................................................1:1 Heavy Soil + Extra Rinse.............................................................................2:1 Coin Meter.........................................................................................................3:1 Fault Codes.......................................................................................................4:1 Operating Mode..........................................
Control Panel 1:1 The display control panel allows the selection of the main wash programs. As desired, options can be selected to modify the wash programs to adjust for load type and soiling. Fig. 1 The control panel consists of program selection buttons (A), option buttons (B), a start button (C), and a display (D) which shows the time remaining and the price for each program. In the event of faults, error codes will be displayed. See the “Fault Codes” section of this manual.
Instructions for Use Washing Fig. • 2 • Load garments into the machine and close the door. Do not overload washer. 1:2 2 Add liquid detergent, bleach, and fabric softener as recommended on the product label. Do not fill liquid bleach and softener above the “MAX” level line. Compartment 1 – Powder or liquid detergent Compartment 2 – Liquid softener Compartment 3 – Liquid bleach Fig. • 3 Press button for the desired program. Fig. • 4 • Press buttons for desired option(s), if any.
Instructions for Use 1:3 Fig. • 5 Press the Start button. 5 HE (High Efficiency) Detergent and How Your Washer Functions with Over Suds Conditions Your washer is a high efficiency front loading washer. It was specifically designed to use less water than top loading washers while achieving very high quality laundering results.
Intentionally blank
Instructions for Use 2.1 Wash Program Description The machine offers four standard wash programs, and two optional features. The basic wash programs are Cold, Warm, Hot, and Delicate. The optional features are Heavy Soil and Extra Rinse. The options can be added to the basic wash programs (except for Delicate), in any combination. On coin-operated models, a different price can be charged for each program, and an additional price can be programmed for each of the two option buttons.
Intentionally blank
Coin Meter 3.1 Coin-Operated Machines In coin-operated machines, prices for programs and options must be programmed during machine setup, and can be modified at any time. The machine must be set to COIN MODE. Prices can be programmed as dollars and cents or as the number of coins or tokens required to start. There are four wash programs COLD, WARM, HOT, and DELICATE and two options HEAVY SOIL and EXTRA RINSE that can be programmed to the same or different prices.
Coin Meter 3.2 DISCOUNT PRICE “PROMOTION” PROGRAMMING The washer is capable of applying a “Promotion” percentage discount to the vend price of a program selection at specified times and days. Up to four different Promotion discount events and percentages can be selected using the washer’s built-in Real Time Clock (RTC) or one promotion event can be selected using an optionally-installed, external signal provided by a clock-driven relay or switch. This signal can activate multiple washers.
Coin Meter 3.3 8. Press START, a two digit day number (“0d”) for which the start day(s) of the week for promotion #1 will be displayed. (01=Sunday, 02=Monday, ...07=Saturday, 08=All days, 09=Monday-Friday only, 0A=Saturday and Sunday only, 00=promotion is inactive.) Edit this number using the DELICATE button to cycle through the allowed values. 9. Press START, the Hours and Minutes in 24 hr format for the start of Promotion #1 will be displayed (hh.mm).
Fault Codes Fault Codes If power to the machine is accidentally cut, the machine will restart automatically when power is restored. The machine will resume the program it was running at the point the power was cut. Fig. 1 4.1 1 Faults/errors in the program or machine are indicated by a numerical error code on the panel display. Some error codes are cleared automatically when the Start button is pressed to restart the machine and some when the door is opened.
Operating Mode 5:1 The washer is capable of accepting payment using coins or tokens in COIN MODE or using payment cards in CARD MODE (serial). Setting the machine to COIN MODE and setting all wash program and option prices to “0.00” will allow the machine to operate for free in OPL mode. COIN OR SERIAL MODE CONFIGURATION 1. In Metered machines unlock and remove the coin box. Press and release the Service Switch located in the rear of the coin vault to enter service mode.
Service Mode The machine’s software provides a “Service Mode” (SM) to adjust operating parameters and view usage statistics. The service mode also allows a technician to activate individual components of the machine, for troubleshooting. The software also provides a “Limited Service Mode” (LSM) that allows a technician to activate machine components, via PIN entry, without having access to the coin vault service switch.
Service Mode 6:2 STATISTICS (NON-RESETTABLE): 000 - Cold program counter. Range: 0000 to F999, (A=10, ... F=15 e.g. “B101” = 11,101) 001 - Warm program counter. Range: 0000 to F999 002 - Hot program counter. Range: 0000 to F999 003 - Delicate program counter. Range: 0000 to F999 004 - Rinse and Spin program counter. Range 0000 to F999 005 - Heavy soil option (only) counter. Range: 0000 to F999 006 - Extra rinse option (only) counter.
Service Mode 025 - Mainwash time: from 0-999 seconds, default=”360”, i.e. six minutes. 026 - Decimal in price: “00”= default=decimal displayed, ”01”= no decimal (token). 027 - Silence buzzer: Range: “00”=default=enabled, “01” = disabled. 028 - Regret Time: The allowable time, after program start, that a user can change the wash program/options or add items to the wash. 0000-9999 seconds. “0000” = disabled, Default = 030. “9999” = unrestricted. Press the START button, to pause the cycle and unlock door.
Service Mode 6:4 *055 - Buzzer test. *056 - Detergent pump trigger signal. *057 - Bleach pump trigger signal. *058 - Softener pump trigger signal. *059 - Coin meter test, each dropped coin adds 1 to displayed total. Registers 009 and 010 unaffected. Real Time Clock (RTC), Calendar and Time-of-day Discount Promotion. 070 - RTC set-up: 24hr format, “070”>yyyy>mm.dd>hh.mm>”070”. During set up, the RTC is stopped. When the “START” button is pressed to save hh.
Preventive Maintenance To keep your machine in proper working order, follow the preventive maintenance recommendations provided below. The maintenance interval should be adjusted according to machine usage. Leave the loading door open when the machine is not in use. Daily • Check the door and door lock: - Open the door and try starting the machine. The machine MUST NOT START. - Close the door, start the machine and try opening the door using reasonable force.
Wash Programs 8.
Wash Programs 8.
Wash Programs 8.
Wash Programs 8.
Wash Programs 8.5 RINSE AND SPIN Agitation 12 sec on / 3 sec off RINSE AND SPIN* PROGRAM NO OPTION HEAVY SOIL EXTRA RINSE PreRinse Drain Prewash ------- Drain Mainwash ----- Drain Rinse 1 --4 min C Drain Spin Y --- Rinse 2 --- Drain Spin ----- Rinse 3 Drain Spin Rinse Soft --------- Drain Spin NOTES: *Register 24 = “00”, No wash programs selected. All segment times are measured from completion of fill.
Sales and Administration: (516) 371-4400 Spare Parts: (516) 371-2000 Technical Support: (516) 371-0700 En Mexico: 001-800-010-1010 461 Doughty Blvd., Inwood, NY 11096 laundrylux.
