User manual

IV) TO REPLACE THE OXY-PILOT ASSEMBLY: The assembly is not an item that can be
serviced as part of its calibration depends on the proximity of the spark electrode and thermocouple tip.
The assembly can be replaced by removing the tube nut and tube from the base of the pilot and the
thermocouple from the FSD. Also the igniter lead and the two M4 screws securing the brackets to the
framework. Replace in reverse order, the spark gap is shown in Fig. 15.
Short Parts List
For spares contact the manufacturer at the address overleaf.
- 15 -
DESCRIPTION CROSSLEE No.
Piezo Igniter 40245 Coal Support L & R Hand 42394
Control Knob 40232 Burner Inserts (2) 41345
Control valve 41833 Front Simulated Coal 40481
Set of Coals 42395
Oxy-Pilot Assembly 42313 LH & RH Side Cheek Set 41981
Main Injector 41669 Marblesque Frame 42121