User manual

Laying the Coal Bed
Place the L & R hand side cheeks with the rebated edges on the sides of the burner support frame and
push towards the back. Place the lower fibre back on the support flange of the back plate and locate the L
& R coal support shelves over the support channel of the burner frame. Place the two Tee shaped burner
inserts in the channel between the front and rear burner ports locate the fibre coal front on the shelf above
the fascia panel.
Coal Layout
Position 4 rectangular coals with their rear edges located on the burner inserts and rotate slightly as shown
in Fig 10.
Stand 3 large coals vertically ever the centre three spaces of the front row of coals and place 4 large coals
vertically on the triangular sections of the coal support shelf, as shown in Fig. 11.
Place the 8 small coals randomly and in a stable position between the peaks of the larger coals.
- 11 -