User manual

9 110803
Remote operation (Fig. 13)
For Flame effect, hold down the Power button and press the Flame button, this will
activate the light unit and produce flame flicker.
Hold down Power and press 1000W button. This will activate the first element.
Hold down Power and Press 2000W button. This will activate the second element.
To cancel operation at any time press the button
Minimum operating distance 1 metre from appliance
Maximum operating distance 5 metre from appliance
Maximum operating height 1 metre
Replacing the bulb
 Disconnect the appliance from the mains!
 Allow the appliance to cool.
 Do not use bulbs of a higher wattage.
 Ensure replacement bulb is 230-240 Volts~ 15 Watt,
with a Small Edison, Screw type fitting.
 Ensure that the bulb holder is held securely
When removing or replacing the bulb.
Remove the coals (D).
Remove the coal bed (C) by removing the two brackets.
(Fig. 8).
Unscrew the used bulb (Fig. 14).
Re-fit in reverse order.
Fig.14
Flame
1000W
2000W Power
Standby
Fig. 13
Anti clockwise
Clockwise