User manual

6 110803

Flat wall fix

(FOR REFERENCE ONLY)

Flat wall fix is suitable for a mantel with a minimum 2

4" (57mm) internal rebate;

remove the internal rebate from the mantel (Fig .4).

Place the marble back panel into position and offer the appliance up to the opening in

the back panel.

Offset the panel from the wall so that it is situated against the rear trim frame of the

appliance; use suitable material to bridge the space between the back panel and the

wall (Fig. 4).

Place the mantel into position and secure to the wall using suitable screws & wall

plugs. (PLEASE REFER TO MAUFACTURERS INSTRUCTIONS FOR

INSTALLATION OF HEARTH & BACK PANEL).

Existing wall

Space to be bridged

Back panel

Fig. 4

Internal rebate