User Guide

CROSCROS

CROS

SKSK

TETE

Crosskate Inc.

13R Bessom St.

Marblehead, M.A. 01945

1.877.CROSSK8

www.crosskate.com

Please refer to the Owner’s Manual that came with your skates

for other important mechanical, safety, and user information.

Please refer to the Owner’s Manual for

the full Crosskate Limited Warranty.

Crosskate tires are changed similarly to bicycle tires.

Tools needed:

3 Plastic tire levers

Removing tubes and tires

It is not necessary to remove the wheels from the skates.

Step 1: Deflate the tire if it is not already deflated.

Step 2: Using 3 plastic tire levers, pry the tire bead over the edge of the

rim that faces away from the frame. Once 1/3 of the bead is pulled over

the edge of the rim, slide a lever around the bead to free it from the rim.

Step 3: Pull the other bead over

the same side of the rim. You may

need to pull the tube out first.

Use care to ensure that the tube

does not get pinched between the

tire and the rim.

Installing tubes and tires

Step 1: Remove the valve cap.

Place the tube inside the tire, and

inflate slightly. The valve stem should face away from the frame, and the

tread pattern should be oriented the same as the other tires.

Step 2: Place valve stem through the rim. Replace the valve cap. Use

your hands to pry the inside tire bead onto the wheel.

Step 3: Push tube inside the wheel making sure that it is not twisted or

bunched up.

Step 4: Place outer bead 1/3 of the way around the rim, and then pry the

rest of the bead into place, ensuring that the tube is not pinched between

the tire and the rim.

Step 5: Twist the tire and tube on rim until the valve stem sits straight.

Pump up to minimum 40psi.

Changing Tubes and Tires