User Guide

MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 42 of 47
Contact us today:
www.sunwave.com
[e-mail]
Figure 48. Screenshot Steps
Backup/Restore Configuration
To back up element’s configuration:
1. Click the Configuration button in the upright of the OMT GUI.
2. Click open configuration and Check boxes for the parameters you want to back up.
3. Check boxes for the parameters you want to back up.
Note: The Port Att is used for manual mode but the Port Power Distribution is used for auto mode. Do Not to select the
Port ATT and Port Power Distribution at same time on Radio Interface Modules on A2/SA2. Otherwise loading
configuration will fail if the file has both of Port Att and Port Power Distribution.
4. Click export Configuration button to download all saved configuration in a .json file
Figure 49. Create a back-up file
Figure 50. Create a backup file successfully
To restore the element’s configuration:
1. Click the Configuration button in the upright of the OMT GUI
2. Click the Load Configuration button
3. Upload the .json file and click the Load button to restore the configurations.