User Guide

MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 32 of 47
Contact us today:
www.sunwave.com
[e-mail]
Figure 36. External Alarms on E2 OMT
Figure 37. External Alarms Name and mode in E2-O
External Alarm of M2RU
The external alarms are connected to the M2RU using a RJ45 dry contact interface located on the front panel of the
M2RU (2 inputs and 2 outputs). See Figure 38 for detailed PIN configuration of this connector. The external alarms can
be monitored as normally closed or normally open.
Use the following steps to view and configure the external alarms.