User Guide

MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 26 of 47
Contact us today:
www.sunwave.com
[e-mail]
Automatic Mode: Set the appropriate value (%) in the field of Port Power Distribution for power distribution.
Note: The input power is reduced to 0dBm automatically then it is calculated for distribution.
7. Set the operator information in the field of Port 1 ~4 Label (Operator/Service).
8. Click the checkbox to select these parameters and click Set to validate them.
Figure 27. Attenuation in Radio Interface Module