User Guide

MID POWER

4 x 37dBm Output

5G NR Compliant

Contact

today:

www.sunwave.com

cf_support@sunwave.com

Additional Settings

Site Info

1. Log in the Master A2 OMT, and go to the Overview.

2. Locate the fields and set the appropriate values:

Device ID - Unique hexadecimal number used to identify the site, default 00000000.

Device Sub ID - Device number in a single system, auto-assigned by Master A2 or manually set by the user.

Device Location - The detailed device installation location.

Site ID - Indicates the details of the current site.

3. Click Set to save the setting.

Figure 20. Site Info Configuration

Note: The Installed Location and Site Name labels cannot contain the following special characters: %, &, ‘, “, \

Time Synchronization

The Master A2 synchronizes time to NTP time servers when NTP Switch is on .

1. Log in the Master A2 OMT, and go to Settings ->LAN Connectivity

2. Go to the NTP section and Turn on the NTP Switch

3. Input NTP Update Interval in certan time horizon and select the appropriate Time Zone

4. Input NTP IP Adress and Click Set to save the settings.