User Guide
MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 19 of 47
Contact
us
today:
www.sunwave.com
cf_support@sunwave.com
Trap Port - The target port of SNMP trap (default defined port of 162).
Trap IP Addr Security EngineID - The Security EngineID of target Trap IP address.
Figure 18. SNMP V3 Configuration
6. Go to the Trap Resend section at the bottom of the page.
Trap Resend Enable: On / Off to enable / disable trap resend.
Trap Resend Interval: The interval time to resend the SNMP trap.
Community: Community Identifier.
Delete History Alarm: Click Confirm to delete history alarms.
7. Click Save to save the settings.
Figure 19. Trap Resend
Note that the Write/Read Community in SNMP server to communicate with CrossFire Device is ‘Community + Device
Sub ID’. For example, the defaut community is ‘public’ and the Device Sub ID of Master A2 is ‘0’. SNMP Server must use
‘public0’ to communicate with Master A2.