Installation Manual

NANO POWER
20dBm Octa Band
Digital Radio
© Sunwave IM_CF_N2 v1.0.1 |
13
of
24
Contact us today:
www.sunwaveglobal.com
[e-mail]
Figure 5. Fix A2 with Screws
3. Secure the A2 using 2 screws M6×16 on
both side and the Phillips screwdriver
(Figure 5).
Figure 6. Separation of adjacent A2s
For rack installation, it is highly recommended to
use fan in the middle of 2 adjacent A2.
Connect power and ground cable to A2
Figure 7. Connect Power Cable at Rear Side
1. Connect and lock the power cable at the A2
rear side (Figure 7).
Figure 8. Connect Ground Cable at Rear Side
2. Connect and screw the ground wire at the A2
rear side (Figure 8).