Installation Manual

NANO POWER
20dBm Octa Band
Digital Radio
© Sunwave IM_CF_N2 v1.0.1 |
14
of
24
Contact us today:
www.sunwaveglobal.com
[e-mail]
Mount the A2 on the Wall
Attach handle to A2
Attach the 19" mounting brackets to the A2 rear, using 4 screws M3×16 per bracket and the Phillips screwdriver. Observe the
orientation of the brackets shown in Figure 9.
Figure 9. Attaching a 19" Mounting Bracket
Mount A2 to wall
Figure 10. Marking position of mounting holes
1. Hold the A2 to the installation location and
mark the position of the 4 mounting holes in
the mounting brackets; see arrows in Figure
10
2. Drill the mounting holes according to the
chosen mounting accessories.
Figure 11. Mounting completed
3. Attach the dowels, expansion screws or the
like and fasten the A2 to the wall (Figure 11).