Installation Manual

NANO POWER
20dBm Octa Band
Digital Radio
© Sunwave IM_CF_N2 v1.0.1 |
12
of
24
Contact us today:
www.sunwaveglobal.com
[e-mail]
Installation of the A2
Mount the A2 in the Rack
Attach A2 handle
Figure 2. Attaching a 19" Mounting Bracket
1. Attach the 19" mounting brackets at the
front of the A2, using 4 screws M3×16 per
bracket and the Phillips screwdriver.
Observe the orientation of the brackets
(Figure 2).
Attach sliding rails and A2 to rack
Figure 3. Attached Sliding Rails
1. Attach the sliding rails Ⓑ to the rack
(Figure 3)
Note: the sliding rails is not included in
delivery.
Figure 4. Place A2 in Rack
2. Place the A2 in the rack (Figure 4)