User manual

38
The rear suspension of your motorcycle has an adjustment point at the bottom of the shock, it comes from
the factory set to the softest setting. If you wish to make the rear suspension harder, follow the procedure
below. Adjusting the rear shock is not hard, but like the front forks, changes should be made one at a time to
gain an accurate understanding of how they affect the bike.
Once you are familiar with the settings on your suspension, you can quickly and easily adjust them to suit
different terrain.
A. The rear shock absorber has one adjuster for both
compression and rebound .
B. By turning the adjuster clockwise , this will
make the compression harder and rebound slower.
C. By turning the adjuster counter-clockwise , this
will make the compression softer and rebound faster.
BASIC MAINTENANCE PROCEDURES
REAR SUSPENSION Cont.
SUSPENSION ADJUSTMENT (REAR)