Lacey Act Declaration Form
PRODUCT
DESCRIPTION:
CROSSCO PERMA SEAL is a water-base, single component, elastomeric roof
and wall sealer that has been modified with silicone for best adhesion on
difficult surfaces. It provides a White Finish which lowers the temperature to
the interior of homes, industrial and commercial buildings. PERMA SEAL will
not crack or peel despite severe weather or joint movement.
RECOMMENDED
USES:
May be used as a roof waterproof coating for flat or sloped roofs such as
metal, concrete, polyurethane foam or shingle. Serves as an excellent
energy efficient coating that extends the life of your roof.
ADVANTAGES:
Color……………………White
Vehicle Base…………Styrene Acrylic
Weight/Gal…………..12.28 lbs
Solids/Weight……….>45%
Solids Volume……….>50%
Viscosity……………….100 kus
Dry Film Thick……….10mils
•Seals and Protects
•White Finish
•Water Clean Up
PRODUCT CHARACTERISTICS
Dry Time/Touch….……1 hr
Dry Time/Re-Coat…...24 hrs
VOC………………………..<100 g/l
PH………………………..….8-9
Flash Point………….…….Non-Flammable
Elongation……………….>100%
Tensile…………………….>200psi
•2 in 1 Primer & Sealer
•Reflects Sun’s Heat Rays
•Lowers Interior Temperature
APPLICATION
RATE:
Apply each coat at a suggested rate of 1 – 2 Gal per 100 sq. ft (16 – 32 Wet
Mills). Refer to system specifications for more details.
ELASTOMERIC SEALER AND ROOF COATING
PERMA SEAL 2in1
CODE: RS003