SDS

Safety Data Sheet
Crossco Quarry Tile Cleaner
SDS Revision Date:
05/19/2015
Page 5 of 10
7.1. Precautions for safe handling
See section 2 for further details. - [Prevention]:
7.2. Conditions for safe storage, including any incompatibilities
Avoid contact with skin and avoid breathing vapors. Do not eat, drink, or smoke in work area. Wash hands prior to
eating, drinking, or using restroom. Any protective clothing, or shoes which become contaminated should be removed
immediately, and laundered before wearing again.
Store in closed, properly labeled, rubber-lined steel, acid-resistant plastic, or glass containers. Do not store near
strong alkalies or reactive materials. Do not remove or deface label or tag.
Incompatible materials: Bases, metals, mercuric sulfate, perchloric acid, carbides of calcium, cesium, rubidium,
acetylides of cesium and rubidium, phosphides of calcium and uranium and lithium silicide.
See section 2 for further details. - [Storage]:
7.3. Specific end use(s)
No data available.
8. Exposure controls and personal protection
8.1. Control parameters
Exposure
CAS No.
Ingredient
Source
Value
0007647-01-0
Hydrochloric acid
OSHA
C 5 ppm (7 mg/m3)
ACGIH
Ceiling: 2 ppmRevised 2003,
NIOSH
C 5 ppm (7 mg/m3)
Supplier
No Established Limit
0007664-38-2
Phosphoric acid
OSHA
TWA 1 mg/m3
ACGIH
TWA: 1 mg/m3STEL: 3 mg/m3
NIOSH
TWA 1 mg/m3 ST 3 mg/m3
Supplier
No Established Limit
0009016-45-9
Nonylphenol polyethoxylate
OSHA
No Established Limit
ACGIH
No Established Limit
NIOSH
No Established Limit
Supplier
No Established Limit
Carcinogen Data