Operation Manual

3 Once the battery is fully charged, unplug the phone from the charger. First,
unplug the charger from the device, then re-plug it into the electric wall socket.
ENERGY-SAVING MODE
This function limits phone features to only basic functions (calls, SMS/MMS,
Internet and SOS + 4 programmable functions). The screen becomes black and
white to reduce energy consumption.
Accessible and configurable via:
Settings > Battery >
(to the top-right of the screen) > Energy-saving Mode
Or: via the shortcut in the notifications bar (by sliding your finger from the top to
the bottom of the screen), on the second page,
icon > Energy-Saving Mode.
To deactivate the energy-saving function, click on
> Deactivate Energy-
Saving-Mode.
ADVICE AND PRECAUTIONS CONCERNING CHARGING THE BATTERY
The battery is integrated into the phone and is not removable. Do not remove
the battery yourself.
■
Only use approved chargers, batteries and cables.The use of non-approved
chargers or cables may cause the battery to explode or damage to your phone.
■
Avoid using your phone while it is charging. Do not cover your phone or the
power adapter.
■
An incorrect charger connection could seriously damage your phone. Any
damage caused by incorrect use is not covered by the warranty.
■
If the voltage of the AC supply is lower, the charge time may be longer.
■
If you use unconventional chargers such as computers, the charge time may be
longer.
■
Charge the battery before using your phone for the first time and unplug the
charger immediately after the completion of the first charge.
■
Unplug the charger from the electric wall socket when the phone is not charging.
26