User's Manual

ManualsBrandsCrossbow Technology ManualsElectronicsWireless Network Sensor

Crossbow Engineering Wireless

AUTHORS: AAFZALI PART NUMBER: MXP2X0_User_Manual.doc

DATE: 2006.06.23

PAGE: 1 of 6

MXP200 and MXP210

User’s Manual

Document Part Number: 7430 – 0528 - 1

Revision: A

CROSSBOW TECHNOLOGY INC., Proprietary and Confidential

—

NOT TO BE DISTRIBUTED OR DUPLICATED WITHOUT PERMISSION

Summary of content (6 pages)

PAGE 1
MXP200 and MXP210 User’s Manual Document Part Number: 7430 – 0528 - 1 Revision: A -- CROSSBOW TECHNOLOGY INC., Proprietary and Confidential — NOT TO BE DISTRIBUTED OR DUPLICATED WITHOUT PERMISSION Crossbow Engineering Wireless AUTHORS: AAFZALI DATE: 2006.06.23 PART NUMBER: MXP2X0_User_Manual.
PAGE 2
Revision A Date Oct 10, 2006 Author Afshin Afzali Comments Initial Creation Crossbow Engineering Wireless AUTHORS: AAFZALI DATE: 2006.06.23 PART NUMBER: MXP2X0_User_Manual.
PAGE 3
Table of Contents 1 MXP200 INSTALLATION: 4 2 MXP210 INSTALLATION: 5 COMPLIANCE STATEMENT: 6 Crossbow Engineering Wireless AUTHORS: AAFZALI DATE: 2006.06.23 PART NUMBER: MXP2X0_User_Manual.
PAGE 4
1 MXP200 Installation: MXP200 SHOULD BE ASSEMBLED INSIDE CARDIO MOTE PER FIG1 AND ASSEMBLY MUST BE PROPERLY PACKAGED TO AVOID DAMAGE DURING SHIPMENT. MXP200 FIG1 – MXP200 Assembly Procedure inside Cardio Mote Crossbow Engineering Wireless AUTHORS: AAFZALI DATE: 2006.06.23 PART NUMBER: MXP2X0_User_Manual.
PAGE 5
2 MXP210 Installation: MXP200 SHOULD BE ASSEMBLED INSIDE STRENGHT MOTE PER FIG2 AND ASSEMBLY MUST BE PROPERLY PACKAGED TO AVOID DAMAGE DURING SHIPMENT. MXP210 MXP210 Antenna FIG2 – MXP210 Assembly Procedure inside Strength Mote Crossbow Engineering Wireless AUTHORS: AAFZALI DATE: 2006.06.23 PART NUMBER: MXP2X0_User_Manual.
PAGE 6
Compliance Statement: This device has been designed, constructed, and tested for compliance with FCC Rules that regulate intentional and unintentional radiators. The user is not permitted to make any modifications to this equipment without express approval from Crossbow Technology Inc. Doing so will void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules.