A TOM USER MANUAL
1. Touch control 2. Microphone 3. Charging case LED 4. Pressure relief hole 5. Rechargeable touch pad 6.
4- FIRST TIME PAIRING 1 2 Take out the earbuds from the charging case 3 The earbuds will auto power ON 4 CB-ATOM Search for ‘CB-ATOM’ in your phone’s BT list CB-ATOM Click to connect
6- LED INDICATOR ON CASE While charging – White light keep blinkingbased on the charge level Low Battery (less than 10%) – The first light will be on for 3 secs Battery full – All 4 lights will be on Current charge level – Press on the button present at the bottom of the case, to check the battery level of the case.
8- RESET 1. Ensure L&R earbuds are disconnected from all the devices, (turn off the Bluetooth option on the device which was connected before) 2. Take out the earbuds from the charging case 3. Quickly tap on the earbuds for 5 times, and the white light flashes, indicating that the reset is complete 4.
9- CONTROLS R L L R R L x1 x1 x1 x3
Note: Tap Touch and hold R x2 R L x2 L x1 L x4 x 3 sec R NOTE: Available only on devices that are Voice Assistant enabled.