Owner`s manual

OPERATION — PAGE 24
WILLIS POWER SYSTEMS
Setting the Time and Day
1. Press [Clk] once to set the hour, then press the up and down
arrow buttons to appropriate time.
2. Press [Clk] again to set the minutes, and press the up and
down arrow buttons to appropriate time.
3. Press the [Clk] button a third time to set the day (day will
ash), and use the arrow buttons to set the day.
4. Press [Exit] to exit the controls.
Setting the Date
e date is needed for automatic daylight savings changeover.
1. Press [Clk] and hold down for 3 seconds to display the year.
2. Set the year using the arrow buttons, press [Clk] again to
display the month.
3. Set the month using the arrow buttons, press [Clk] again to
display the date.
4. Set the date using the arrow buttons, press [Exit] to exit the
control settings.
Energy Savings Schedule
The schedule automatically controls your heat/cool system by
switching between set points according to the preset times.