Owner`s manual

OPERATION — PAGE 18
WILLIS POWER SYSTEMS
Metering
Generator Voltage,
3-phase, L-L and L-N
Engine hours Run/ Oil Pressure Gauge
Generator Frequency Engine Temperature Gauge
Mains Voltage, 3-phase,
L-L and L-N
Fuel Level
Battery Voltage Fail to Start
Indicators
Fail to Stop Failed to reach loading voltage
Low Oil pressure Failed to reach loading frequency
High Engine Temp Charge Fail
Under/Over-speed
Over Current – Warning, Shutdown
or Electrical Trip
Under/Over voltage –
Warning, Shutdown or
Electrical Trip
Low DC Voltage; AMF indications
Emergency Stop; +
CAN diagnostics
At power up, the display will
display the software version and
then display the default display
screen, which will display Generator
Frequency
EVENT LOG
The info button toggles between the display of the instrumenta-
tion and the event log. Pressing the down button will move to the
previous event. A number in the bottom left indicates the event log
entry currently being displayed.
There are ve event log entries. When the event log is displayed,
the alarm icon area indicates the alarm type at that position of the
event log. The hours run at the time of the alarm will be displayed in
the instrumentation area. The bottom right icon indicates the current
mode as normal.