Owner`s manual

OPERATION — PAGE 11WILLIS POWER SYSTEMS
THERMOSTAT SETTINGS
1. Set the Thermostat to A/C or Heat.
2. Use the selector switch to set the fan to automatic mode (AUTO)
or continuous mode (ON).
• AUTO-The fan regulates cabin temperature according to
selected temperature on the thermostat.
• ON-The fan operates continuously and does not regulate to
the selected temperature.
3. Select your temperature setting.
The cabin temperature is normally displayed. To view the set
point, press a button once. The set point & icon is displayed
for 5 sec. Pressing either of the buttons more than once will
change the set point Press one of the buttons until the desired
temperature is displayed.