Owner`s manual

88 Servicing Your Honda
Exhaust Pipe/Muffler
Muffler Installation
1. Remove the gasket (1).
2. Install the muffler clamp (2) and new gasket
onto the exhaust pipe (3).
(1) gasket (3) exhaust pipe
(2) muffler clamp
3. Install the muffler (4).
4. Install the muffler clamp (5) by aligning the
tab (6) of the muffler clamp with the cut-out
(7) of the muffler.
(4) muffler (6) tab
(5) muffler clamp (7) cut-out
5. Tighten the muffler B bolt/washers (8) and
muffler A bolt (9) to the specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
6. Tighten the muffler clamp bolt (10) to the
specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
(8) muffler B bolt/washers (10) muffler clamp bolt
(9) muffler A bolt
(11) right side cover (13) seat mounting bolt
(12) side cover bolt
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(13)
(11)
(12)
7. Install the right side cover (11) and side cover
bolt (12).
8. Install the seat mounting bolt (13) and tighten
it to the specified torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
076-093.qxd 06.5.11 13:07 ページ88