Owner`s manual

Servicing Your Honda 33
Subframe Removal
2. Make sure the carburetor lug (4) align with
the air cleaner connecting tube slot (5).
3. Tighten the screw (6) on the air cleaner
connecting tube clamp (7).
4. Install and hook the fuel tank band (8).
5. Hook the air cleaner case cover (9).
6. Connect the crankcase breather tube (10).
(4) lug
(5) slot
(6) screw
(7) air cleaner connecting tube clamp
(8) fuel tank band
(9) air cleaner case cover
(10) crankcase breather tube
7. Remove the old gasket from exhaust pipe.
8. Install the muffler clamp (11) and new gasket
(12) to the exhaust pipe.
(11) muffler clamp (12) gasket
9. Install the muffler (13).
(13) muffler (15) tub
(14) muffler clamp (16) cut-out
(17) muffler B bolt/washers
(18) muffler A bolt
(19) muffler clamp bolt
13. Install the side covers (20) and bolts (21).
14. Install the seat (page 29).
(20) side covers
(21) bolts
(6)
(7)
(9)
(10)
(8)
(5)
(4)
(12)
(11)
(13)
(14)
(16)
(15)
(17)
(18)
(19)
(20)
(21)
10. Install the muffler clamp (14) by aligning the
tab (15) of the muffler clamp with the cut-out
(16) of the muffler.
11. Tighten the muffler B bolt/washers (17) and
muffler A bolt (18) to the specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
12. Tighten the muffler clamp bolt (19) to the
specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
024-053.qxd 06.5.11 11:58 ページ33