Owner`s manual

Front Suspension Adjustments
108 Adjustments for Competition
26.Route the number plate tab (27) around the
handlebar pad (28) as shown.
(27) number plate tab
(28) handlebar pad
27.With the front brake applied, pump the fork
up and down several times to seat the axle
and check front brake operation.
28.While keeping the forks parallel, alternately
tighten the right axle pinch bolts (29) to the
specified torque:
15 Ibf·ft (20 N·m, 2.0 kgf·m)
(29) right axle pinch bolts
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the
left fork leg clamp inner surface.
29.Install the disc cover (30) and tighten the
bolts (31) to the specified torque:
10 Ibf·ft (13 N·m, 1.3 kgf·m)
NOTICE
(30) disc cover (31) bolts
(27)
(28)
(29)
(30)
(31)
(32) rebound damping (33) compression
adjuster screw damping
adjuster screw
(32)
(33)
30.Turn the rebound damping (32) and
compression damping (33) adjuster screws
back to their original settings.
094-117.qxd 06.5.11 13:09 ページ108