Owner`s manual

Front Suspension Adjustments
Adjustments for Competition 103
Fork Assembly
1. Drain the fork oil from the outer tube/slider
(1) by placing it upside down.
(About 7 cc of fork oil will be left in the outer
tube/slider when it is left inverted for about 20
minutes at 20°C)
(1) outer tube/slider
2. Tighten the lock nut (2) fully and measure the
thread length (A) as shown.
Standard:
0.43 – 0.51 in (11 – 13 mm)
Wipe the oil completely off the fork damper.
(2) lock nut (A) thread length
3. Blow out the oil completely off the fork
spring (3) using the compressed air.
Install the fork spring.
Install the fork damper assembly (4) to the
outer tube/slider (1).
(1) outer tube/slider (4) fork damper assembly
(3) fork spring
(cont’d)
(1)
(2)
(A)
(3)
(4)
(1)
094-117.qxd 06.5.11 13:09 ページ103