Instruction manual

2.5.5 Alarm Indications
An alarm condition for will occur if any local oscillator phase lock loop (PLL) comes out of lock. The Mute
LED will light if you select Mute and the Remote LED will light when you select the Remote mode.
SCROLL <>
SCROLL
PUSH BUTTON
SCROLL <>
SCROLL
PUSH BUTTON
SCROLL <>
SCROLL
PUSH BUTTON
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
REV 1.00
F = 23123.125
G = +10 Ref=AUTO=I
F = 23
123.125
REMOTE
OFF
EXT REF
O
F
SCROLL <>
SCROLL
PUSH BUTTON
Power Up
Normal Display
Menu 1 Frequency
Menu 2 Gain (+30 to +50)
Menu 3 Set Spectrum Invert
Menu 4 Set Unit to Remote
Operation
Menu 5 Select Frequency Step
Size (option -X1008)
Menu 6 Select External 10 MHz
Reference (option-E)
Menu 7 Set Remote Mode
(opt.-Q) (opt.W8, W18, W28
Menu 8 Set RS-485 Address
(option Q)
Save? When “R” is selected or at
the end of the menu options
G = +1
0
SAVE SETTINGS?
Y N
SCROLL <>
PUSH BUTTON
R
R
R
R
RS 485 OF
F
R
ADDRESS = 0
0 R
SCROLL <>
SCROLL
PUSH BUTTON
SCROLL <>
SCROLL
PUSH BUTTON
DNSPECTRUM NON
SCROLL <>
SCROLL
PUSH BUTTON
R
SCROLL <>
SCROLL
PUSH BUTTON
STEP = 125 KHZ
FIGURE 2.5 Menu Display and Sequence
3016-2124- Manual_Rev.0 Page 16 8/02/12