Instruction manual

INSTRUCTION MANUAL
Model 2416-x02 Multi Channel Downconverter
TABLE OF CONTENTS PAGE
Warranty 2
1.0 General 3
1.1 Equipment Description 3
1.2 Technical Specifications 4
1.3 Engineering Application Note 6
1.4 Monitor & Control Interface 7
1.5 Environmental Use Information 11
2.0 Installation 12
2.1 Mechanical 12
2.2 Rear Panel Inputs & Outputs 13
2.3 Front Panel Controls & Indicators 14
2.4 Operation 15
2.5 Menu Settings 16
3.0 Ethernet Interface 19
3.1 Connection 19
3.2 Ethernet Configuration 19
3.3 Webpage M&C 22
3.4 SNMP Configuration 23
WARRANTY - The following warranty applies to all Cross Technologies, Inc. products.
All Cross Technologies, Inc. products are warranted against defective materials and
workmanship for a period of one year after shipment to customer. Cross Technologies,
Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s
option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall
not be liable for any special, indirect, or consequential damages. This warranty does not
cover parts or equipment which have been subject to misuse, negligence, or accident by the
customer during use. All shipping costs for warranty repairs will be prepaid by the
customer. There are not other warranties, express or implied, except as stated herein.
CROSS TECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
WEB www.crosstechnologies.com
E-MAIL [e-mail]
2416-402 Manual, Rev. D Page 2 04/01/2015