Instruction manual

3.3 Web page M&C
Enter the following address in a web browser to access the M&C web page:
http://<ip address of 2082-14x-47>/serial/0/setup.htm where <ip address> is the IP address of the unit.
Figure 2-C (page 11) shows the web page from a model 2082-14x-47 frequency converter.
Figure 2-C - Model 2082-14x-47 Web page
3.4 SNMP Configuration
Setting of SNMP parameters such as Community Write and Community Read strings requires a Telnet
®
connection to port 9999. The following instructions explain how to establish such a Telnet
®
connection using
Windows XP's Hyper Terminal utility.
Start the Hyper Terminal application and select “New Connection” from the “File” drop down menu. The next
screen is a “Connect To” dialog box. Select TCP/IP (Winsock) from the “Connect” using drop down menu.
Enter the IP address of the 2082-14x-47 in the “Host address:” field and 9999 in the “Port number” field.
Figure 2-E shows an example of the Hyper Terminal settings required to access the SNMP configuration menu.
2082-14x-47 Manual, Rev. B Page 27 12/19/13