Instruction manual

INSTRUCTION MANUAL
MODEL 2082-14x-47 Redundant Unit Controller
TABLE OF CONTENTS PAGE
Warranty 2
1.0 General 3
1.1 Equipment Description 3
1.2 Technical Characteristics 4
1.3 Control & Operation 5
1.4 Setup/Testing 6
1.5 M&C Interface 12
1.6 Environmental Use Information 14
2.0 Installation 15
2.1 Mechanical 15
2.2 Rear I/O’s 16
2.3 Front Panel Controls, Indicators 18
2.4 Installation/Operation 19
2.5 Menu Settings 20
3.0 Ethernet Interface Installation & Operation 26
WARRANTY - The following warranty applies to all Cross Technologies, Inc. products.
All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period
of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited
to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies.
Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages. This
warranty does not cover parts or equipment which have been subject to misuse, negligence, or accident by the
customer during use. All shipping costs for warranty repairs will be prepaid by the customer. There are not
other warranties, express or implied, except as stated herein.
CROSS TECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
[phone]
FAX [phone]
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL [e-mail]
2082-14x-47 Manual, Rev. B Page 2 12/19/13