Instruction manual

2.0 Installation
2.1 Mechanical
The 2082-14x-47 consists of one PCB housed in a 1 RU (1 3/4 inch high) by 16 inch deep chassis.
Two redundant switching +27 VDC power supplies are diode “OR’ed to provide +26 VDC for the assembly.
The 2082-14x-47 can be secured to a rack using the 4 holes on the front panel. Figure 2.0 shows how the
2082-14x-47 is assembled.
PCB
POWER
SUPPLY
1
POWER
SUPPLY
2
J7
from PS2
J6
from PS1
J4
from MS conn.
FIGURE 2.0 2082-141-47 Mechanical Assembly
2082-14x-47 Manual, Rev. B Page 15 12/19/13