Instruction manual

1.2 Technical Characteristics
TABLE 1.1 2015-24 Upconverter Specifications*
Input Characteristics (IF)
Impedance 75 
Return Loss 18 dB
Frequency 140 ± 36 MHz
Level -40 to -10 dBm
Output Characteristics (RF)
Impedance 75 
Return Loss 12 dB
Frequency 950 to 2150 MHz
Level -20 to 0 dBm
1dB compression +5 dBm
Channel Characteristics
Gain range -10 to +30 dB (adjustable)
Frequency Response ±1.5 dB, 950-2150 MHz ; ± 0.5 dB, 72 MHz BW
Spurious Response <-50 dBC
Group Delay, max 0.0035 ns/MHz
2
, parabolic, 0.025 ns/MHz, linear, 1 ns ripple
Frequency Sense Non-inverting
Synthesizer Characteristics
Frequency Accuracy ±0.01 ppm internal reference; external reference input
Frequency Step 1kHz, 10kHz, 100kHz, or 125kHz (user selectable)
10 MHz In/Out Level +3 dBm ± 3 dB (option E)
-120-110-90-85-75
1MHz100kHz10kHz1kHz100 Hz
dBC/Hz
Phase Noise
@
Fre
q
Controls, Indicators
Freq/Gain Selection Direct readout LCD; pushbutton switches or remote selection
Power Green LED
Alarm Red LED
Mute Yellow LED
Remote Yellow LED
Remote RS232C, 9600 baud (RS485, option Q)
Other
RF Connector Type F (female)
IF Connector BNC (female)
10 MHz Connectors BNC (female), 50/75 (option E)
Alarm/Remote Conn. DB9 - NO or NC contact closure on Alarm
Size 19 inch, 1RU standard chassis 1.75”high X 16.0” deep
Power 100-240 ±10% VAC, 47-63 Hz, 45 watts max
Options
Available Options See SECTION 2.6, page 18
Connector options See TABLE 2.2, page 10
*+10˚C to +40˚C; Specifications subject to change without notice
2015-24 Manual_Rev.C Page 4 03/22/10